Demo account · sample data, not a real system · exit demo · sign up
Welcome to OwlWatt
1
Contract
2
Collector
3
Connect
4
Enphase
5
Dashboard
Upload your solar contract
We'll analyze your installer's promises and tell you what to watch for.
📜
Drag a contract PDF here or click to browse
PDF only, max 10 MB, stored encrypted.
Uploading…
How should OwlWatt read your production?
📡
Through an OwlWatt Iris at your home (recommended)
$149 one-time
A dedicated monitoring device that plugs into your router and collects data around the clock. Best accuracy.
☁
Through your Enphase account
No hardware
No device needed. We connect directly to your Enphase account and pull your production data daily from Enphase's own cloud. Good fallback if you don't want a physical device. Data updates once a day instead of live.
Your plan
Monthly$9.99/mo
Annual (save 27%)$87.89/yr
Optional: buy the dedicated OwlWatt Iris collector any time. Shipping is included.
Stripe collects your address securely at checkout. You can also add it later from Settings.
Optional early upgrade. Your 30-day free trial is already active and doesn't require a card.
Connect your OwlWatt collector
Plug in your OwlWatt Iris and connect it to your router via ethernet cable.
Looking for your device on this network...
Make sure your OwlWatt Iris is plugged in and connected to your router.
Device connected
Discovering your solar equipment...
📷
Can't auto-detect your device?
Scan this QR code with your phone while connected to your home WiFi:
Or visit http://owlwatt.local on your phone and enter the pairing code shown there:
Connect your Enphase account
This lets your collector communicate with your solar equipment. You'll only need to enter this once.
Enphase will ask you to sign in with the email and password you use for the Enphase app, then to tap Allow. OwlWatt never sees your password, and Enphase only lets us read your production numbers. Data updates once a day.
SolarEdge will ask you to sign in with the email and password you use for the SolarEdge app, then to approve access. OwlWatt never sees your password, and SolarEdge only lets us read your production numbers. Data updates once a day.
✓
Connected
Your collector is now monitoring your solar system.
You're all set
Your OwlWatt dashboard is ready. Data will start flowing within 60-90 seconds.
☀ Producing now ?How much power your solar panels are generating right now, measured in watts.
—
watts
🌤️ Weather
—
—
—
🏡 Consuming Now ?How much power your home is pulling right now across every appliance and device, measured in watts.
—
watts
Home consumption isn’t measured live for this system.
⚡ Grid ?Green = you're saving or making money, using less electricity than your solar is producing. Red = you're spending or losing money, using more electricity than your solar is producing. Gray = neutral, you're using and producing the same amount of electricity.
—
—
Sun trajectory ?The sun's path across your sky today, calculated from your ZIP code. Shows where the sun is right now, solar noon, and how much daylight is left.
Sun altitude ?How high above the horizon the sun is right now. Higher altitude means more direct light on your panels.
—
—
Remaining sun ?How much daylight is left before sunset at your location.
—
Day progress ?How far through today's solar window you are, where sunrise is 0% and sunset is 100%.
—
Solar noon ?The moment the sun crosses its highest point today. Production peaks close to this time, within about an hour on a clear day.
—
Savings today ?Estimated money saved today by using solar power instead of buying from the grid.
—
Savings month ?Estimated money saved so far this month by using solar instead of buying from the grid.
—
Grid today ?Estimated cost of the electricity you've pulled from the grid so far today.
—
Est. grid bill ?Rough projection of your grid electricity cost for the full month, based on your usage pattern and current rates.
—
—
Grid dep. ?What percentage of your total electricity usage comes from the grid vs your solar panels.
—
of use from grid
History ?Your production, consumption, and grid flow over time. Switch between today, the last 7 days, or the last 30 days to spot trends.
ProductionConsumptionGrid
midnightnow
Today ?Total energy your solar panels have produced today, measured in kilowatt-hours.
—
kWh
Month ?Total energy your solar panels have produced so far this month, in kilowatt-hours.
—
kWh
Month consumption ?Total energy your home has used this month, solar + grid combined, in kilowatt-hours.
—
kWh
⚡ Your usage pattern ?Your hourly electricity use baseline, built from the last 14 days. Red bars flag hours where today is running noticeably above your normal baseline.
Baseline avgToday (normal)Today (anomaly)
Shows your hourly electricity consumption baseline, built from the last 14 days. Red bars indicate hours where today's usage is significantly above your baseline, which is often a sign to check your HVAC, water heater, or appliances.
ⓘ Your baseline is still building. This view becomes accurate after ~14 days of monitoring.
⚡ Microinverters ?A live view of each panel on your roof. Colors show relative output so you can spot a weak or offline panel at a glance.
■ ≥60%
■ 15 to 60%
■ <15%
■ 0W
■ stale
Per-panel snapshots update every 15 to 25 minutes (your gateway polls each inverter via powerline in batches). Data up to 30 minutes old is normal, and at night the inverters sleep. This view is diagnostic. It shows which panels are strong or weak relative to each other. Your total production and savings are calculated from high-frequency meter readings (every 5 seconds) and are not affected by the per-panel reporting cadence. A panel consistently >45 minutes stale during daylight may need attention.
Panel-level data: available for Enphase microinverter systems.
▸NOT REPORTING (0)
Waiting for first inverter scan…
Per-panel data refreshes every 15 to 25 minutes once your collector is online.
⚙ Power Optimizers?Each optimizer's identity and reporting status, grouped by the inverter it connects to.
■ reporting
■ not reporting
SolarEdge does not publish per-panel power or energy through any API documented for third-party or site-owner access, at any service tier. Your own SolarEdge phone app does show per-panel energy, and it is worth a look if you want to spot a single weak or shaded panel. What the API does give us, and what is shown here: each optimizer's position, the inverter it connects to, its model, and whether it is currently reporting. Your total production is calculated at the system and inverter level instead (see the Production section above) from meter-grade readings, unaffected by this limit.
Waiting for first optimizer inventory scan…
☀️ Solar performance ?A month-by-month look at how much of your home's electricity came from solar versus the grid, using the bills you've uploaded. Includes your best month and estimated total savings.
Analyzing your bill history…
📊
Upload at least one utility bill to see your solar performance breakdown.
Monthly solar vs grid
Solar
Grid import
Best month ?The month where solar covered the highest percentage of your electricity needs.
—
—
Est. savings ?Approximate total savings compared to what your electricity would cost without solar, based on your usage patterns and your configured import rate (MA default rate until you set yours in Settings). This is a rough estimate.
—
estimated total
Net producer months ?Months where your solar panels produced more energy than your home consumed from the grid.
—
—
Summer vs Winter ?Average monthly grid import during summer (Jun-Aug) compared to winter (Dec-Feb). Lower is better. It means solar is covering more of your needs.
—
—
⚠ Production guarantee claim ?Your contractual shortfall based on the guarantee terms in your solar contract. This is the figure your contract's remedy clause applies to, based on the guarantee terms extracted from your contract.
Evaluating your contractual guarantee…
📄
Upload your solar contract to enable guarantee tracking.
Documented
Documented contractual shortfall
$0
For informational purposes only, not legal advice. Whether a shortfall entitles you to a remedy depends on your contract. Consult a licensed attorney.
⚠ Confirm a few contract conditions so your report reflects them
📈 System health ?Shows whether your equipment is performing as well as the weather allows. This is a health diagnostic. It is NOT your contractual claim. See the guarantee claim card above for what your installer may owe you.
How is your equipment performing given the weather it received? We model what a clean system
of your size should produce in the actual weather, then compare against your real output.
This ratio is a health indicator. It does not determine your contractual claim amount.
Pulls up to 12 months of history from your monitoring system so the analysis has a longer baseline.
Modeling expected production…
📉
We need your system specs (capacity, location) and at least some production
data to run a weather-adjusted performance analysis.
Performance ratio
?Actual production divided by weather-adjusted expected production. Above 0.90 is excellent, 0.80 to 0.90 is normal, and below 0.80 may indicate an issue.
Monthly: actual vs expected
Actual
Expected
Actual ?Your system's real measured production over the period being analyzed, totaled in kilowatt-hours.
—
kWh
Expected ?Modeled estimate of what your system should produce given its specs, location, and the pvlib Ineichen clear-sky irradiance model. This is a theoretical maximum (assumes no clouds), so it is a conservative baseline.
—
kWh
Weather gap ?The difference between weather-adjusted expected and actual production. A health indicator only. See the Guarantee Claim card for your contractual shortfall.
—
kWh gap (diagnostic)
Days analyzed ?How many days of production data this performance analysis is based on. More days = a more reliable verdict.
—
—
⚠Production Guarantee Shortfall Detected?Your system produced less than its contracted guarantee since your contract started. The estimated value is the documented value of the gap under the terms of your production guarantee.
Estimated Value
$0
Shortfall
0 kWh
Confidence
--
📅
📈
⚠ Confirm your contract start date before generating your report
✓ Contract start date confirmed:
Generates the most recent complete contract year. Use per-year buttons above for earlier years.
⚠ Confirm your contract start date before generating your report
✓ Contract start date confirmed:
Past Reports
💧 Panel cleanliness ?Detects if dust, pollen, or grime on your panels is dragging down production. Compares current output to your clean-panel baseline and estimates the kWh you're losing.
Analyzing panel cleanliness…
💧
We need at least 21 days of production data plus your system specs to
detect soiling patterns.
Complete setup
Confidence: --%
Current PR ?Your performance ratio right now, which is the fraction of the theoretical clean-panel maximum your system is delivering. 1.0 = perfect.
--
Baseline PR ?Your performance ratio at the start of this analysis window, modeled against expected production and adjusted for measured tree-canopy shading. A moderate or heavy soiling level is only shown when rain-recovery or year-over-year evidence confirms the decline against this baseline is not just the normal seasonal pattern.
--
PR decline ?How far your current performance ratio has dropped below your clean-panel baseline. Larger numbers mean more soiling.
--
Estimated production loss from soiling
----
🌶 Pollen likely the cause.
Rain recovery evidence
Methodology & caveats
Local cleaning providers
No cleaning providers found in your area yet. Set your ZIP code in Settings.
🌳 Tree canopy shading ?Measures nearby tree canopy around your array from public USGS LiDAR surveys, and how much direct sunlight it blocks. Screening evidence for shortfall disputes, not part of your production guarantee.
🌳
No canopy survey has been measured for your array yet.
A canopy measurement is in progress. Check back soon.
🌳
No USGS LiDAR survey covers your address, so canopy shading cannot
be measured here.
The last canopy measurement attempt did not complete. It will retry
automatically.
Survey date ?Date the USGS LiDAR flight that produced this measurement was flown.
--
Shading loss ?Estimated annual direct-sunlight loss from measured tree canopy, weighted by your array's actual orientation.
--
Measured canopy growth
Only one survey is on file. A second measurement in a later year
will show whether the canopy around your array has grown since.
🌶 Pollen forecast
🦊 Your solar installation ?A single answer combining what your installer's contract says, what our production-curve analysis sees, and what we can detect in your roof's satellite image. We show the most-trusted source's answer, and when sources disagree you see why.
Source breakdown
🧭 Estimated panel orientation ?Infers which direction each array of panels is facing by studying how their output shifts through the day. Once we're confident, the assignment is locked so the card stops changing day-to-day.
Per-panel production relative to your fleet median right now. Green = matching peers (healthy). Red = significantly below peers. That panel may be shaded, soiled, or malfunctioning. Click a panel for details.
🦉
Owl Insights has moved
Owl Insights is now part of the Dashboard. Look for the headline card at the top.
Billing cycle shift detected.
Bill coverage calendar ?Shows which months we have a bill for (green) and which are missing (red). Fuller coverage means sharper savings numbers and a stronger guarantee baseline.
Green marks months with bill data and red marks missing months. Upload the missing bills for complete coverage.
Loading coverage data…
Upload an electric bill ?Drop in a PDF of your utility bill. We pull the billing period, kWh used, and rate automatically and check it against what our model expected for that month.
Drop a PDF of your most recent utility bill and we'll auto-extract the billing period, kWh used, and rate.
We compare it against our production model to flag anything unusual.
📄
Drag bill PDFs here or click to browse
PDF only, max 10 MB each. Select multiple files at once. Stored encrypted.
Uploading…
Latest bill analysis ?A breakdown of your most recent bill: what you paid, what was solar-offset, and how it compares to the month before.
Bill history ?Every bill you've uploaded, plus a trend chart of the kWh you're buying from the grid over time.
📊
Your uploaded bills will appear here with a kWh-purchased trend chart.
Upload your solar contract ?Upload the PDF your installer gave you. We extract your install date, system size, and guarantee terms so we can track your production guarantee and flag shortfalls.
We extract install date, system size, and production guarantee terms. You review everything before we save anything to your profile.
📜
Drag a contract PDF here or click to browse
PDF only, max 10 MB, stored encrypted.
Uploading…
Latest contract analysis ?A plain-English summary of the contract you just uploaded: system specs, guarantee terms, and anything unusual worth knowing about.
Uploaded contracts ?Every contract you've uploaded, with the key terms we extracted. You can re-open any of them to review the analysis.
🗁
Upload your installer contract above to see the analysis here.
OwlWatt provides information and documentation, not legal advice. For advice on your specific situation, consult a licensed attorney.
Save these to your profile?
We found these details in the document. Confirm the values you want saved to your profile.
⚠ Warranty claims
?Claims against your installer for hardware or installation defects. You describe the issue, we format the paperwork, you send it.
For equipment failure (inverter down, dead panel) or workmanship defects (roof leak, bad wiring).
You describe the issue and we format it against the warranty terms
in your contract.
Your claims
File a New Claim
Loading claims...
Claim Details
Earn commissions by referring OwlWatt
Share your link. When someone you refer becomes a paying customer, you earn a one-time commission.
This is a demo account. Create your own OwlWatt account to get a referral link and earn a one-time commission per referred customer.
Referral program not yet configured. Referral rewards open once the affiliate tracking key is activated on our side. There’s no date fixed for that yet. Contact [email protected] if you'd like to be notified.
You’re not yet signed up as an affiliate.
Sign up for free at Rewardful to get your unique referral link and start earning a one-time commission per referred customer.
Share your link
Send it to friends, post it on social, or add it to your email signature. Every click is tracked to you.
2
They subscribe
When someone follows your link and becomes a paying OwlWatt subscriber, the conversion is attributed to you.
3
You earn a one-time commission
When someone you refer becomes a paying customer, you earn a one-time commission paid out via Rewardful, with one payout per referred customer, ever. No monthly accumulation, no statement reconciliation.
We give you the same fair shake we give our customers. No installer commissions involved. Referrals are consumer-to-consumer only. OwlWatt never accepts commissions from installers or equipment vendors.
Account actions
This is a demo account. Create your own OwlWatt account to manage settings for your system.
Your ZIP gives us local weather, accurate sun trajectory, and (soon) automatic utility-plan lookup.
Street address is optional and only used for more precise shading analysis. We never show it back anywhere else.
Password
Set a password to protect your account in addition to email login.
Phone number
Required before SMS notifications can be enabled on the
Notifications tab.
We'll send a 6-digit verification code; the number isn't used for anything else.
MVP: any 6-digit code will be accepted until Twilio is wired up.
Two-factor authentication (2FA)
Loading…
Scan this QR code with your Authenticator app (Google Authenticator, Authy, 1Password):
Or enter the secret manually:
Save these backup codes somewhere safe. They will not be shown again. Each works once.
Backup codes remaining: —
Subscription & billing
Update your payment method, download invoices, or cancel your subscription.
Opens Stripe's secure billing portal in a new tab.
Generates a ZIP with your profile, contracts, daily-aggregated telemetry, analyses, and support tickets. Generation takes ~30s; we email you a download link when ready.
Data retention
Raw 5-second telemetry is retained for 13 months to support year-over-year comparisons, billing anomaly detection, and audit-ready reports. Aggregated daily/monthly data is kept indefinitely for historical trends. To erase all your data entirely, use Account Deletion.
Account actions
Cancel account
Cancel your subscription and delete your account. Your data is preserved for 90 days in case you change your mind.
Restore purchases
Previously purchased a subscription? Tap below to restore it to this account.
Delete account
Permanently delete your OwlWatt account and all associated data.
This schedules deletion after a 90-day grace period.
API Tokens
Generate API tokens for Home Assistant, scripts, or other clients that need read-only access to your OwlWatt data.
The token is shown only once. Copy it now and paste it into the
OwlWatt Home Assistant integration.
Your tokens
Name
Scope
Created
Last used
Last IP
Status
Your API token
This is the only time this token will be shown.
Store it somewhere safe. You cannot retrieve it again.
⚠ This is the only time this token will be shown. Store it somewhere safe.
Create API token
Installer
Enphase cloud connection ?Links your Enphase Enlighten account so OwlWatt can pull historical production data. Used for backfilling months before your Iris was installed.
Loading…
Your Enphase connection needs attention. Your password may have changed.
Please re-enter your Enlighten credentials below.
Enphase will ask you to sign in with the email and password you use for the Enphase app, then to tap Allow. OwlWatt never sees your password, and Enphase only lets us read your production numbers. Data updates once a day.
Pulling data from Enphase…
Notifying your device…
SolarEdge cloud connection ?Links your SolarEdge account (OAuth, no password shared with OwlWatt) so we can pull your site's daily production for the guarantee math.
Loading…
Your SolarEdge connection needs attention. Please reconnect below.
You'll sign in at SolarEdge's own site and approve access. We never see your SolarEdge password.
🦉 Your roof analysis
?Overhead satellite imagery of your property with AI-powered panel detection. Stored privately and not shared. Analysis is a one-time product, and you have a 30-day review window after it's posted.
Confidence: medium. If the panel count or orientation looks wrong, use Request a review.
If your install spans multiple roof planes (e.g. front & back of the house, or house & garage), add each as its own plane. Don't have this handy? Your installer's contract or system-design paperwork lists azimuth, tilt, panel count, and panel wattage per plane, and once we have enough production history we may be able to suggest values for you to confirm or correct, instead of starting from a blank form. When we cannot suggest values for your system, the reason appears under the list of planes.
Add plane
System specifications
The minimum for accurate performance tracking. Until you enter yours, we assume a typical US residential array (south-facing, owned system). Override if yours differs.
If you're using the Solar planes card above, the azimuth / tilt / panel-count here are legacy single-plane fallbacks only. New customers should fill in planes above instead.
System facts, sources & corrections
Your contract, your equipment, and your own statements sometimes disagree. Below is what each source says and which one we use for your numbers.
► My system differs from my contract
If what's on your roof is different from what your contract says (different panels, a different inverter, or a different system size), tell us here.
This never changes your contract. It records what you told us alongside it, and we
compare it with what your contract says and what your equipment reports.
Installer
Contract
Loading…
Need to upload a new contract? Visit the
Contract tab.
Hardware
Grid provider
SREC enrollment
Available in MA, NJ, MD, DC, PA, OH, IL, DE.
Key dates & estimates
Your devices
healthy
warning
critical
Loading…
Notifications
This is a demo account. Create your own OwlWatt account to manage notification and alert-delivery settings for your system.
Notifications matrix
Pick which events reach you through which channel.
Loading notifications…
Contact consent
We send transactional messages (account changes, security alerts,
support ticket responses, billing receipts) as part of the service. These are mandatory per our Terms of Service.
Everything below is optional and you can change it anytime.
Alert thresholds
Tune how sensitive your alerts are. The matrix above controls which channels get them.
Notices
Submit a request
Pick the type that fits best. We use it to route your submission to
the right queue.
Thanks for reaching out. Reply time is within 72 hours.
The more context you share, the better we can help.
If OwlWatt's AI assistant ever drafts a reply, it'll be clearly
labeled. You can reply "human please" any time to go
straight to a person.
